InteliLite Global Guide
598
Related FW 1.9.0 Related applications AMF, MRS
Comm object 40
Description
This output is dedicated for coolant pump control. It is closed in the moment the gen-set is started and
remains closed until the gen-set is stopped and After Cooling Time (page 220) elapses or the cranking
pause or the Emergency Stop occurs or the controller is switched to OFF mode.
Image 8.169 Cooling Pump
Cooling Pump
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 74
Description
The output closes when gen-set is in Cooling state.
Cooling
6 back to Logical binary outputs alphabetically
LBO: D
Related FW 1.9.0 Related applications AMF, MRS
Comm object 2097
Description
This LBO is active when there is Dual Operation Fail (page 703) alarm in alarmlist.
Dual Operation Error
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 2096
Description
This LBO is active when there is not Dual Operation Fail (page 703) alarm in alarmlist.
Dual Operation OK
6 back to Logical binary outputs alphabetically
To Next Page
Loading...
