ComAp InteliMains NT IM-NT-BB - Page 204

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
204
Range [units]
DISABLED, ENABLED [-]
Related FW
standard v3.1.0
Description
Switch this setpoint to ENABLED position if your SMTP server requires
authentificated access. You have also adjust SMTP user name and SMTP
password. Ask your internet provider or IT manager for this information.
NOTE:
Most of public free SMTP servers require authentification. You will get
instructions when you register to the freemail service.
11.2.3.26 Setpoint: SMTP user name
Group
Comms settings
Range [units]
max. 32 characters [-]
Related FW
standard v3.1.0
Description
Use this setpoint to enter the user name for the SMTP server if SMTP
authentification is enabled.
11.2.3.27 Setpoint: SMTP password
Group
Comms settings
Range [units]
max. 32 characters [-]
Related FW
standard v3.1.0
Description
Use this setpoint to enter the password for the SMTP server if SMTP
authentification is enabled.
11.2.3.28 Setpoint: SMTP address
Group
Comms settings
Range [units]
max. 32 characters
Related FW
standard v3.1.0
Description
CAUTION!
Proper setting of SMTP-related setpoints as well as controller mailbox are
essential for sending alerts via e-mails.