ComAp InteliMains NT IM-NT-BB - Page 363

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
363
Description
This input is used to disable temporarily the output from the Timer channel
#1.
NOTE:
See also the setpoint TimerChannel 1 and output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
13.2.1.47 Binary input: Timer block 2
Related FW
standard v3.1.0
Description
This input is used to disable temporarily the output from the Timer channel
#2.
NOTE:
See also the setpoint TimerChannel 2 and output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
13.2.1.48 Binary input: Timer block 3
Related FW
standard v3.1.0
Description
This input is used to disable temporarily the output from the Timer channel
#3.
NOTE:
See also the setpoint TimerChannel 3 and output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
13.2.1.49 Binary input: Timer block 4
Related FW
standard v3.1.0
Description
This input is used to disable temporarily the output from the Timer channel
#4.
NOTE: