InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf, ©ComAp – April 2015
While this input is active the value of ExtValue 3 is contiously beeing
increased at the rate of ExtValue3 rate until it reaches ExtValue3HiLim.
NOTE:
If this input is used (configured), the ExtValue 3 can't be written remotely
from a remote terminal using the command ExtValue 3.
13.2.1.67 Binary input: ExtValue3 down
While this input is active the value of ExtValue 3 is contiously beeing
decreased at the rate of ExtValue3 rate until it reaches ExtValue3LoLim.
NOTE:
If this input is used (configured), the ExtValue 3 can't be written remotely
from a remote terminal using the command ExtValue 3.
13.2.1.68 Binary input: ExtValue4 up
While this input is active the value of ExtValue 4 is contiously beeing
increased at the rate of ExtValue4 rate until it reaches ExtValue4HiLim.
NOTE:
If this input is used (configured), the ExtValue 4 can't be written remotely
from a remote terminal using the command ExtValue 4.
13.2.1.69 Binary input: ExtValue4 down
While this input is active the value of ExtValue 4 is contiously beeing
decreased at the rate of ExtValue4 rate until it reaches ExtValue4LoLim.
NOTE:
If this input is used (configured), the ExtValue 4 can't be written remotely
from a remote terminal using the command ExtValue 4.
13.2.1.70 Binary input: ExtValue1reset
To Next Page
Loading...