EasyManuals Logo

Compaq dc5800 - Microtower PC Reference Guide

Compaq dc5800 - Microtower PC
255 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #233 background imageLoading...
Page #233 background image
Solving Memory Problems
If you encounter memory problems, some common causes and solutions are listed in the following table.
CAUTION: Power may still be supplied to the DIMMs when the computer is turned off (depending on
the Management Engine (ME) settings). To avoid damage to the DIMMs or the system board, you must
unplug the computer power cord before attempting to reseat, install, or remove a DIMM module.
For those systems that support ECC memory, HP does not support mixing ECC and non-ECC memory.
Otherwise, the computer will not boot the operating system.
NOTE: The memory count will be affected by configurations with the Management Engine (ME)
enabled. The ME uses 8MB of system memory in single channel mode or 16MB of memory in dual-
channel mode to download, decompress, and execute the ME firmware for Out-of-Band (OOB), third-
party data storage, and other management functions.
Table E-13 Solving Memory Problems
System will not boot or does not function properly after installing additional memory modules.
Cause
Solution
A memory module is not installed in the XMM1 (or DIMM1)
socket.
Ensure that a memory module is installed in the black XMM1
(or DIMM1) socket on the system board. This socket must be
populated with a memory module.
Memory module is not the correct type or speed grade for the
system or the new memory module is not seated properly.
Replace module with the correct industry-standard device for
the computer. On some models, ECC and non-ECC memory
modules cannot be mixed.
Out of memory error.
Cause Solution
Memory configuration may not be set up correctly. Use the Device Manager to check memory configuration.
You have run out of memory to run the application. Check the application documentation to determine the memory
requirements.
Memory count during POST is wrong.
Cause Solution
The memory modules may not be installed correctly. Check that the memory modules have been installed correctly
and that proper modules are used.
Integrated graphics may use system memory. No action required.
Solving Memory Problems 225

Table of Contents

Other manuals for Compaq dc5800 - Microtower PC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Compaq dc5800 - Microtower PC and is the answer not in the manual?

Compaq dc5800 - Microtower PC Specifications

General IconGeneral
ProcessorIntel Core 2 Duo, Intel Pentium Dual-Core, Intel Celeron
MemoryUp to 8 GB DDR2 SDRAM
GraphicsIntegrated Intel Graphics Media Accelerator 3100
Optical DriveDVD-ROM, DVD+/-RW
Form FactorMicrotower
Expansion Slots1 PCI, 2 PCIe x1, 1 PCIe x16
AudioIntegrated High Definition Audio
NetworkIntegrated Gigabit Ethernet
PortsVGA, Serial, Parallel, PS/2, Audio in/out
Operating SystemWindows Vista Business, Windows XP Professional
Power Supply300W
USB Ports8 USB 2.0 (2 front, 6 rear)

Related product manuals