EasyManuals Logo

Compaq dc5800 - Microtower PC Reference Guide

Compaq dc5800 - Microtower PC
255 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #226 background imageLoading...
Page #226 background image
Solving Keyboard and Mouse Problems
If you encounter keyboard or mouse problems, see the documentation that came with the equipment
and to the common causes and solutions listed in the following table.
Table E-9 Solving Keyboard Problems
Keyboard commands and typing are not recognized by the computer.
Cause Solution
Keyboard connector is not properly connected. 1. On the Windows XP Desktop, click Start > Shut Down.
On the Windows Vista Desktop, click Start, click the
arrow on the lower right corner of the Start menu, then
select Shut Down.
2. After the shutdown is complete, reconnect the keyboard
to the back of the computer and restart the computer.
Program in use has stopped responding to commands. Shut down your computer using the mouse and then restart
the computer.
Keyboard needs repairs. See the Worldwide Limited Warranty for terms and conditions.
Computer is in standby mode. Press the power button to resume from standby mode.
CAUTION: When attempting to resume from standby mode,
do not hold down the power button for more than four seconds.
Otherwise, the computer will shut down and you will lose any
unsaved data.
Cursor will not move using the arrow keys on the keypad.
Cause Solution
The Num Lock key may be on. Press the Num Lock key. The Num Lock light should not be on
if you want to use the arrow keys. The Num Lock key can be
disabled (or enabled) in Computer Setup.
Table E-10 Solving Mouse Problems
Mouse does not respond to movement or is too slow.
Cause
Solution
Mouse connector is not properly plugged into the back of the
computer.
Shut down the computer using the keyboard.
1. Press the Ctrl and Esc keys at the same time (or press
the Windows logo key) to display the Start menu.
2. Use the arrow keys to select Shut Down and then press
the Enter key.
3. After the shutdown is complete, plug the mouse
connector into the back of the computer (or the keyboard)
and restart.
Program in use has stopped responding to commands. Shut down the computer using the keyboard then restart the
computer.
218 Appendix E Troubleshooting Without Diagnostics

Table of Contents

Other manuals for Compaq dc5800 - Microtower PC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Compaq dc5800 - Microtower PC and is the answer not in the manual?

Compaq dc5800 - Microtower PC Specifications

General IconGeneral
ProcessorIntel Core 2 Duo, Intel Pentium Dual-Core, Intel Celeron
MemoryUp to 8 GB DDR2 SDRAM
GraphicsIntegrated Intel Graphics Media Accelerator 3100
Optical DriveDVD-ROM, DVD+/-RW
Form FactorMicrotower
Expansion Slots1 PCI, 2 PCIe x1, 1 PCIe x16
AudioIntegrated High Definition Audio
NetworkIntegrated Gigabit Ethernet
PortsVGA, Serial, Parallel, PS/2, Audio in/out
Operating SystemWindows Vista Business, Windows XP Professional
Power Supply300W
USB Ports8 USB 2.0 (2 front, 6 rear)

Related product manuals