10
2.5.1
Firstly, the device must be assigned a valid IP address from your network.
“Setup wizard
parameters”.
Configure the new IP address:
Firstly, the device must be assigned a valid IP address from your network.
Figure 6 and then in the new window (
FIGURE 7. ACCESS TO THE DEVICE’S IP ADDRESS
Configure the new IP address:
FIGURE 8. CONFIGURATION OF THE IP ADDRESS
2 – Instalación
ón. IPefono. V2.8
Firstly, the device must be assigned a valid IP address from your network.
Navigate to the
7) “Network