ConectaIP IPefono WM User Manual

Configuration Guide. IPefono.
3.
All SIP commands are given one or more response codes, indicating how the call is
progressing or that an error has occurred.
been successfully
received, the
processed, 3XX
codes (
failure), 5XX (
server failure
The following
traces are also useful:
 phone:
This allows you to check that the behaviour of the intercom is configured
correctly.
 video:
Shows communication with the connected camera.
 io:
Indicates the processes being performed at the outputs and
changes to th
e status of the inputs.
These types of traces are cumulative, so they can be activated and appear together.
current trace monitoring, simply execute the “
6.8.2
Network commands
When the IPefono is not communicating properly with the
number of tests to see where the issue is.
 ping <
destination IP address
connectivity, without taking into account the configuration of the protocols and
ports.
 arp –a: This
allows you to view the table that lists the IP addr
address or
MAC.
 netstat:
Displays the table with the IPefono’s
status.
6.8.3
Audio commands
If there are problems with the audio, you can perform a number
commands.

play <message file>
 audiotest:
Performs an audio test with the speaker and microphone.
 call:
Makes a call as if you have pressed the call button.
6.8.4
Video commands
These commands ch
eck the connection and that the camera is working.
 video version:
Prints out the version and serial number of the camera.
 video detect:
Detects the communication speed with the camera.
 video init:
Restarts the camera.
6 –
System administration
.
V2.8
All SIP commands are given one or more response codes, indicating how the call is
progressing or that an error has occurred.
The code 200 (correct
) informs you that it has
received, the
1XX codes (provisional
) that the command is being
codes (
redirection) that the call has been
diverted and
server failure
) and 6XX codes (global failure
) that an error has occurred.
traces are also useful:
This allows you to check that the behaviour of the intercom is configured
Shows communication with the connected camera.
Indicates the processes being performed at the outputs and
e status of the inputs.
These types of traces are cumulative, so they can be activated and appear together.
current trace monitoring, simply execute the “
trace off” command.
Network commands
When the IPefono is not communicating properly with the
remote device, you can perform a
number of tests to see where the issue is.
destination IP address
>:
This is used to check whether there is IP
connectivity, without taking into account the configuration of the protocols and
allows you to view the table that lists the IP addr
ess with the physical
MAC.
Displays the table with the IPefono’s
TCP/IP connection ports and their
Audio commands
If there are problems with the audio, you can perform a number
of tests by using the following
play <message file>
: Plays a message over the speaker.
Performs an audio test with the speaker and microphone.
Makes a call as if you have pressed the call button.
Video commands
eck the connection and that the camera is working.
Prints out the version and serial number of the camera.
Detects the communication speed with the camera.
Restarts the camera.
System administration
65
All SIP commands are given one or more response codes, indicating how the call is
) informs you that it has
) that the command is being
diverted and
4XX (client
) that an error has occurred.
This allows you to check that the behaviour of the intercom is configured
Indicates the processes being performed at the outputs and
shows any
These types of traces are cumulative, so they can be activated and appear together.
To cancel
remote device, you can perform a
This is used to check whether there is IP
connectivity, without taking into account the configuration of the protocols and
ess with the physical
TCP/IP connection ports and their
of tests by using the following
Performs an audio test with the speaker and microphone.
Prints out the version and serial number of the camera.
Detects the communication speed with the camera.

ConectaIP IPefono WM Specifications

General

Brand	ConectaIP
Model	IPefono WM
Category	Intercom System
Language	English