20
4.8 Open a
door or barrier by keying in a code
If the IPefono opens a door
or barrier by keying in a code,
7) and click the “
Open a door or barrier when dialing a code
follows:
Open a door or barrier when dialing a code
Relay connected to the door
Opening code in the remote phone
Opening code in the local keypad
Time during which the relay remain activated
Message to play when the door is opened
FIGURE 19. C
4.9 Paging funct
If you have an IPefono Speaker, its functionality is configured by first selecting the option
the device like a public area speaker
Use the device like a public area
Playing message when the broadcaster
Broadcaster connection timeout
Broadcast paging zone of this speaker
F
4.10 Video
The
module” option (see Figure
Select the video camera module
Camera module
F
4 –
door or barrier by keying in a code
or barrier by keying in a code,
go to the wizard home screen
Open a door or barrier when dialing a code
” option.
Open a door or barrier when dialing a code
Relay connected to the door
Output number connected to the door
Opening code in the remote phone
Code keyed into the remote telephone to
open it
Opening code in the local keypad
Code keyed in on the IPefono keyboard to
open it
Time during which the relay remain activated
Time in
seconds for which the output
remains activated.
activated
Message to play when the door is opened
Message played on activating the output
N OF OPEN A DOOR O BARRIER BY KEYING IN A
ty
If you have an IPefono Speaker, its functionality is configured by first selecting the option
the device like a public area speaker
” (see Figure 7).
The settings are as follows:
Use the device like a public area
speaker
Playing message when the broadcaster
Select the message that is played when the
paging connection is
Broadcaster connection timeout
Maximum paging connection time
no limit.
Broadcast paging zone of this speaker
Paging zone to which the IPefono belongs
20. CONFIGURATION OF PAGING FUNCTIONALITY
is configured by first selecting the “
). The settings are as follows:
Select the video camera module
Model of the camera, see section
21. CONFIGURATION OF VIDEO CAMERA MODULE
on Assistant
ón. IPefono. V2.8
go to the wizard home screen
(Figure
Output number connected to the door
Code keyed into the remote telephone to
Code keyed in on the IPefono keyboard to
seconds for which the output
Message played on activating the output
If you have an IPefono Speaker, its functionality is configured by first selecting the option
“Use
The settings are as follows:
Select the message that is played when the
Maximum paging connection time
. ‘0’ there is
Paging zone to which the IPefono belongs
Model of the camera, see section
3.7 Video
To Next Page
Loading...
Need help?
General