Manual de Configuración. IPefono. V2.8 17
4
Setup Wizard
4.1 Initial configuration
The Setup Wizard simplifies configuring the IPefono, therefore allowing you to configure the
device’s basic settings without having to enter the web configurator which contains all of the
configuration settings.
Navigate to the device’s setup wizard by following the steps that are outlined in section 2.5
Startup. There are the following different hyperlinks on the setup wizard home screen
General parameters
General settings
Network parameters
Network configuration
Connect the device to a SIP server
Connect the device to a SIP server
Direct call to a VoIP phone
Make a direct call to a VoIP telephone
Adjust the acoustic echo cancellation
Adjust the echo cancellation settings
Sound levels
Audio volumes
Open a door or barrier when dialing a code
Open a door or barrier by inputting a code
Use the device like a public area speaker
Use the device’s paging feature
Select the video camera module
Select the video camera module
Broadcast the auxiliary audio line
Retransmission of the auxiliary audio line
FIGURE 12 . SETUP WIZARD HOME SCREEN
To Next Page
Loading...
Need help?
General