ConectaIP IPefono WM - General Settings

Configuration Guide. IPefono.
5.2
General settings
If you go to the configuration home screen (
configure the following system settings:
Main
Device type
Firmware version
Device name
Device description
Administrator contact
Device location
Administrator username
Administrator password
Auto set up is activated
F
IGURE
The initial configuration system
required to enter, complete the username and password fields.
.
V2.8
General settings
If you go to the configuration home screen (
Figure 23), by clicking on the “
Main
configure the following system settings:
IPefono-HQ
1.15
4041
Name of the device
Input1
Description of the device
____________
IP address of the administrator
____________
Location of the device
____________
Username
____________
Password
○ Yes ●No
Auto-configura
tion activated o deactivated
(see section 5.10 Auto-c
onfiguration
IGURE 25. CONFIGURATION OF GENERAL SETTINGS
The initial configuration system
has unrestricted access
, if you want authentication to be
required to enter, complete the username and password fields.
5 – Configuration
25
Main
” option, you can
IP address of the administrator
tion activated o deactivated
onfiguration
)
, if you want authentication to be