ConectaIP IPefono WM - Editing the Configuration File

Configuration Guide. IPefono.
Keyboard.speakerD =
Emergency.input = none
Emergency.keyCodeOn =
Emergency.keyCodeOff =
Emergency.emergencyMessage =
Emergency.pauseTime =
30
Emergency.expirationTime =
Emergency.tone = silence
Emergency.output = none
6.3.3
Editing the configuration
The configuration file can be downloaded from the device by using the “
configuration”
option shown in
editor and changed while retaining the original format.
to upload the new configuration.
the “Reset device”
option shown i
6 –
System administration
.
V2.8
Play a message when the 'D' key is
pressed
Input to activate the emergency mode
Activate this mode when user type
Deactivate it when the user type this code
Emergency.emergencyMessage =
Play this message when the device is in …
30
Time before replaying the massage in …
Emergency.expirationTime =
360
The
emergency mode will be disabled …
Tone for playing between messages
Activate this output in emergency mode
FIGURE 57. IPEFONO CONFIGURATION TEXT FILE
Editing the configuration
file
The configuration file can be downloaded from the device by using the “
option shown in
Figure 56. Once it is on your PC it
can be edited with any text
editor and changed while retaining the original format.
Use the “
Upload configuration
to upload the new configuration.
The system has to be restarted for it to take effect, by selecting
option shown i
n Figure 56.
System administration
57
Play a message when the 'D' key is
Input to activate the emergency mode
Activate this mode when user type
this …
Deactivate it when the user type this code
Play this message when the device is in …
Time before replaying the massage in …
emergency mode will be disabled …
Tone for playing between messages
Activate this output in emergency mode
The configuration file can be downloaded from the device by using the “
Download
can be edited with any text
Upload configuration
” option
The system has to be restarted for it to take effect, by selecting