ConectaIP IPefono WM User Manual

18
4.2 General
settings
If you go to the setup wizard home screen
option,
you can configure the following settings:
General parameters
Name of this device
Description to display in the remote phone
Device administration username
Device administration password
F
IGURE
The initial configuration system has unrestricted access, if you want authentication to be
required to enter, complete the username and password fields.
4.3
Network configuratio
The network is configured by first selecting the
The settings are as follows:
Network parameters
Get an IP address automatically
IP address
Network mask
Gateway
DNS
F
IGURE
4.4 Connection
to a SIP
The connection
to a SIP server
server” option (see Figure 7
).
Connect
the device to a SIP server
SIP server hostname or IP address
Account number
Account password
Destination call number
F
IGURE
4 –
Configurati
Manual de Configuraci
settings
If you go to the setup wizard home screen
(Figure 7), by clicking on the “
General parameters
you can configure the following settings:
Name of the device
Description to display in the remote phone
Description of the device displayed on the
remote telephone
Device administration username
Username
Device administration password
Password
IGURE
13. CONFIGURATION OF GENERAL SETTINGS
The initial configuration system has unrestricted access, if you want authentication to be
required to enter, complete the username and password fields.
Network configuratio
n
The network is configured by first selecting the
“Network parameters”
option
Get an IP address automatically
○ Yes ●No
Whether the parameters are assigned
a DHCP server
IP address of the device
Mask of the IPefono
IP address of the gateway
DNS port
IGURE
14. CONFIGURATION OF NETWORK SETTINGS
to a SIP
server
to a SIP server
is configured by first selecting the “
Connect the device to a SIP
).
The settings are as follows:
the device to a SIP server
SIP server hostname or IP address
URL or IP address of the server
Account number set up on the server
Password to log into the server
Extension number that is called when
clicking on the call button
IGURE
15. CONFIGURATION OF CONNECTION TO A SIP SERVER
Configurati
on Assistant
Manual de Configuraci
ón. IPefono. V2.8
General parameters
”
Description of the device displayed on the
The initial configuration system has unrestricted access, if you want authentication to be
option
(see Figure 7).
Whether the parameters are assigned
from
Connect the device to a SIP
URL or IP address of the server
Account number set up on the server
Password to log into the server
Extension number that is called when

ConectaIP IPefono WM Specifications

General

Brand	ConectaIP
Model	IPefono WM
Category	Intercom System
Language	English