ConectaIP IPefono WM User Manual

Configuration Guide. IPefono.
5.6.1 SIP protocol.
VoIP connections
The configuration settings for the SIP protocol are as follows:
VoIP.sip
Call button destination SIP URL
Alternative SIP URL
UDP port
STUN server
External IP address
Proxy hostname or IP address
Proxy account name
Proxy account password
Domain name
Proxy registration time in
seconds
Register only when an
outgoing
call is pending
Resolve the destination IP
address using the called name
FIGURE
35
Undoubtedly, t
he flexibility of SIP (Session Initiation Protocol) based
been the key to the success of these systems
configure each of the environments that can be found.
by intercoms, with details of how to configure the settings corr
Bear in mind that SIP addresses are expressed in the following way:

If the device is connected to a VoIP provider
 sip:(name
of the device being called)

If it is not connected to a VoIP provider
 sip:(name
of the device being called)@(IP address of the device being called)
.
V2.8
VoIP connections
The configuration settings for the SIP protocol are as follows:
Call button destination SIP URL
1@192.168.22.251
Destination SIP address of the
button
__________
Address if the previous one does
not respond
5060
UDP port of the SIP protocol
1000
Address of the STUN server
__________
IP address if it is static
Proxy hostname or IP address
*
IP address of the SIP VoIP provider
__________
Account name of the VoIP provider
__________
Registration password for the
provider
__________
The provider’s domain name
seconds
30
How often the device is registered
with the provider, in seconds
outgoing
○ Yes ●No
Only registered with the provider
when a call has to be made
Resolve the destination IP
address using the called name
○ Yes ●No
Activates the automatic phonebook
for shared dialling between
IPefonos
35
. CONFIGURATION OF THE SIP PROTOCOL (VOIP OPTION)
he flexibility of SIP (Session Initiation Protocol) based
telephony systems h
been the key to the success of these systems
,
but it does require a minimum of knowledge to
configure each of the environments that can be found.
Listed below are the possibilities offered
by intercoms, with details of how to configure the settings corr
ectly in each case.
Bear in mind that SIP addresses are expressed in the following way:
If the device is connected to a VoIP provider
of the device being called)
If it is not connected to a VoIP provider
of the device being called)@(IP address of the device being called)
5 – Configuration
33
Destination SIP address of the
Address if the previous one does
UDP port of the SIP protocol
Address of the STUN server
IP address if it is static
IP address of the SIP VoIP provider
Account name of the VoIP provider
Registration password for the
The provider’s domain name
How often the device is registered
with the provider, in seconds
Only registered with the provider
when a call has to be made
Activates the automatic phonebook
for shared dialling between
telephony systems h
as
but it does require a minimum of knowledge to
Listed below are the possibilities offered
ectly in each case.

ConectaIP IPefono WM Specifications

General

Brand	ConectaIP
Model	IPefono WM
Category	Intercom System
Language	English