ConectaIP IPefono WM User Manual

2
The IPefono LC / WM / WMT /WMe has:
 A microphone input.
 A 4
Ω or 8Ω speaker output.
 A
call progress indicator.
 5
V power supply.
The communication ports are as follows:

100BT Ethernet port with
It also has the following I/O ports (inputs and outputs):

1 input (call button) with wire break

1 output (opening of door

Connector for 4x4 matrix keyboard.
The IPefono HQ has:

A microphone input.
 A 4
Ω or 8Ω speaker output.

A call progress indicator.

5V to 24V auxiliary power supply.
The communication por
ts are as follows:

Two Ethernet ports (Switch Ethernet).
It also has the following I/O ports (inputs and outputs):

1 input (call button).
 2 i
nputs or 2 outputs (opening of d

Connector for 4x4 matrix keyboard.
Configuration Guide
The IPefono LC / WM / WMT /WMe has:
Ω or 8Ω speaker output.
A class-D amplifier with 3.2 W.
call progress indicator.
V power supply.
The communication ports are as follows:
100BT Ethernet port with
remote power supply
(Power over Ethernet).
It also has the following I/O ports (inputs and outputs):
1 input (call button) with wire break
detector.
1 output (opening of door
s).
Connector for 4x4 matrix keyboard.
A microphone input.
Ω or 8Ω speaker output.
A class-D amplifier with 3.2 W.
A call progress indicator.
5V to 24V auxiliary power supply.
ts are as follows:
Two Ethernet ports (Switch Ethernet).
It also has the following I/O ports (inputs and outputs):
1 input (call button).
nputs or 2 outputs (opening of d
oors).
Connector for 4x4 matrix keyboard.
1 – Introduction
Configuration Guide
. IPefono. V2.8
(Power over Ethernet).

ConectaIP IPefono WM Specifications

General

Brand	ConectaIP
Model	IPefono WM
Category	Intercom System
Language	English