Precision II Operation and Maintenance Manual
C
2-24
996-0255 rev. b
Possible sources for power meter
Scientech, Boulder, Colorado
Diamond Ophir, North Reading, Mass.
Gentec, Ste-Foy, Quebec
Molectron, 7470 S.W. Bridgeport Rd.,
Portland, OR 97224. Tel: (800) 366-4340
• oscilloscope, with a bandwidth of 350 MHz or better and
a enhanced view screen for viewing 5 ns/Div traces.
Possible sources for oscilloscope
Tektronix, Beaverton, Oregon (mdl #2467)
LeCroy, Chestnut Ridge, New York
• IR phosphor card
Possible sources for IR phosphor card
Kodak, Rochester, New York
Quantex, Rockville, Maryland
• Photodiode with rise time <1 ns
Precision Applied Science, Ann Arbour, Michigan
Call Continuum Service, Santa Clara, California.
Tel: 1+(408) 727-3240
System installation
The installation of the laser will be performed by a Continuum represen-
tative at a date agreed upon between the user and Continuum at the time
of delivery.
The installation will consist of:
a) Hooking up the laser to the water and electricity.
b) Demonstration of system turn-on and operation.
c) Explanation of routine maintenance procedures.
d) Measure energy output of the system.
e) Performance of additional acceptance tests as specified in
purchase order. Shot-to-shot performance will be demon-
strated if storage oscilloscope is made available.
See cover letter for details.
To Next Page
Loading...
Need help?
General