32
CONVAID USER’S GUIDE
Fig. 58 Fig. 59 Fig. 60
To Adjust the Height on Fixed Individual Footplates (standard) and Angle-adjustable Individual
Footplates (Option):
1. Remove detent pins, circled in Fig. 58 & 59.
2. Slide footplate up leg rest extension tube until desired height has been reached. Fig. 60
3. Reinsert detent pin.
4. Repeat on opposite side.
Footplate Adjustment
Flyer foot support is height adjustable. To determine the correct
seat-to foot support height, measure from the back of the knee
to the bottom of the heel. The soles of the feet or heels should
rest comfortably on top of the footplates. Fig. 57
Foot
support
height
Fig. 57
Small Length Screw
Small Length Screw
Nylon Flat Screw
Nylon Flat Screw
Locknut
Locknut
R82 Clip
R82 Clip
Fig. 55 Fig. 56
To Next Page
Loading...
