Convaid Flyer - Oxygen Tank Holder; Attaching LTV Bracket

46
CONVAID USER’S GUIDE
Attaching LTV Bracket
1. Loosen 2 bolts on right curved side frame tube.
2. Slide the tank holder hook over curved side frame tube.
3. Align left and right slots of LTV vent holder with left and right bolts
on left hand side of frame. Fig. 115
Fig. 115
Oxygen Tank Holder
How to Hang the Oxygen Tank Holder
1. Remove the two frame bolts located on the
left side of the frame with 5/32” Allen wrench.
Fig. 111
2. Slide the oxygen tank holder in place. Fig. 112
3. Re-install the frame bolts with 5/32” Allen
wrench.
How to Secure Oxygen Tank
1. Place tank onto the bottom lip of the oxygen
tank holder.
2. Secure the upper strap by buckling tight at
both the midpoint and bottom of tank.
Fig. 113
3. Conrm the straps are secure. Fig. 105
Fig. 111
Fig. 113
Fig. 112
Fig. 114