4
CONVAID USER’S GUIDE
WARNING: To reduce the risk of an accident:
• ALWAYS carefully read the User’s Guide and become comfortable with
operating the chair.
• ALWAYS watch for obstacles and avoid them as often as possible.
• MAKE SURE that the chair operates properly. Repair any problems before
use.
• ALWAYS verify that the quick-release axles are locked so that the back
wheels do not come off.
• ALWAYS secure the user into the chair during use.
WARNING: Positioning belts should never be used as a safety restraint device
in a motor vehicle when transporting chair with occupant. An additional WC19
compliant automotive type seat belt is required when the chair is used in
transport vehicles.
WARNING: Changes & Adjustments
Adjustments made to the chair may change the balance and function of the
chair and may increase risk of tip over. Consult the Convaid Service Dealer
before making adjustments.
WARNING: No modications may be made to the mobility base or seating
module, including but not limited to:
• Drilling holes
• Removing rivets
Warranty will be voided if modications that change the structure of the
mobility base and/or seating module of the chair are made without
manufacturer’s authorization.
WARNING: Unauthorized modications may cause a safety hazard. If the
warning is ignored, damage to your chair, and the potential severe injury of the
person using the chair for unintended purposes, can occur.
WARNING: The chair should only be used on at, rm terrain.
To Next Page
Loading...
