Product Manual – DOC. 8432A Crestron Pyng OS 2 for CP4-R • 99
Edit Event Dialog Box
3. Configure the following event settings:
• Enter a descriptive name for the event in the text box at the top of the dialog box
using the on-screen keyboard.
• Tap the check box next to Enabled to enable the event and add it to the
thermostat schedule. New events are disabled by default.
• Set the time that the thermostat event should occur using the provided spinner
menus.
• Tap the check box above each day of the week to select the days that the
thermostat event should occur. A filled check box indicates that the event is
scheduled to occur on the associated day.
• Select the temperature set points for cooling , heating , and auto
modes using the appropriate spinner menu.
4. Tap OK to save the new thermostat event.
Tap Cancel to cancel any changes. Tap the trashcan button to delete the event.
To Next Page
Loading...
