Crestron CP4-R User Manual

184 • Crestron Pyng OS 2 for CP4-R Product Manual – DOC. 8432A
Settings
Tap Settings on the user menu to access settings for user control mode. A dialog box is
displayed prompting for a password. Enter the user password to display the
Settings
screen.
Settings Screen - Room Settings
The Settings screen provides selections for selecting and organizing the items that
appear on the user menus and for customizing the look and feel of the user interface.
The following general controls are provided on the Settings screen.
• Tap Share Settings to share the configured user settings with other user control
devices (such as iPad devices, smart phones, and touch screens) configured for
the Crestron Pyng system.
• Tap Reset to Default to reset the user settings to their default values.
• Tap Configure System to access the user setup screens (by entering the user
password) or to access the installer setup screens (by entering the installer
password).
• Tap Privacy to view privacy policies regarding use of the Crestron Pyng system
and to view whether the system is set to collect user data.
The following settings may be configured using the Settings screen.
NOTE: The Settings screen for the TSW-x60 series touch screens provides an additional
Hardware menu for configuring touch screen settings, as well as an alternate menu
layout. For more information, refer to "Touch Screen Settings" on page
190.

Crestron CP4-R Specifications

General

Brand	Crestron
Model	CP4-R
Category	Controller
Language	English