Product Manual – DOC. 8432A Crestron Pyng OS 2 for CP4-R • 127
Voice Control Settings Screen - Current Status
The following settings may be viewed and configured:
• Enable Status: Tap Enable or Disable to enable or disable voice control,
respectively, for the system.
o If Enable is selected, the system connects to and processes commands from
the voice recognition service.
o If Disable is selected, the system disconnects from the voice control service,
and voice control commands will no longer be processed.
• Registration Completed: Indicates whether or not the system is registered with
the voice recognition service
• Connection Status: Indicates the connection state between the system and the
voice control service (If the system is enabled but unable to connect to the
service, additional details are provided in the message logs.)
NOTE: If the system is unable to connect to the voice control service (Connection
Status does not display as "Connected"), navigate to the registration portal and
delete the control system from the portal. If the system is registered and
connected, but voice commands are not working, ensure that Crestron is enabled
on the voice service provider’s app.
Tap Unregister to clear the registration credentials from the system and the voice
control administration portal. Tap
OK in the dialog box that is displayed to unregister
from voice control services, or tap
Cancel to cancel unregistering the system.
NOTE: To enable or disable control of a specific room or load, navigate to the Voice
Control tab in the configuration settings for the room or load. Loads without a Voice
Control tab are not compatible with voice control.
To Next Page
Loading...
Need help?
General
