148 • Crestron Pyng OS 2 for CP4-R Product Manual – DOC. 8432A
The following additional status information is provided for the Sonos System gateway:
NOTE: For more information on troubleshooting the Sonos system, refer to "Appendix A:
Sonos and Crestron Pyng Integration" on page 195.
• If the Sonos system has discovered devices from multiple households after a
device from one household has been paired, a two house icon with a red x is
shown.
• If the Sonos system is not detected by the Crestron Pyng system, a network tree
icon with a red x is shown.
• If the Sonos system is disabled, an unfilled house icon is shown.
• If a paired Sonos device is not detected by the Crestron Pyng system, a music
note icon with a red x is shown.
Tap the gear button next to a gateway to view and modify gateway settings and to
view all devices paired to the gateway. For more information on configuring gateway
settings, refer to "Managing Gateways" on page 41.
If an issue is found with a gateway, tap the warning button next to the device to view
more information about the issue.
To Next Page
Loading...
