Product Manual – DOC. 8432A Crestron Pyng OS 2 for CP4-R • 173
To ungroup media rooms, open the group media rooms menu, and then tap the down
arrow next to the grouped rooms. Options for ungrouping the rooms are displayed.
Room 1 + 3 - Group Media Rooms Menu
Tap the appropriate item to remove a room from the grouping or to ungroup all rooms.
Observe the following points about media groups and Sonos device groups:
• Group Creation
o All compatible endpoint devices that may be grouped (such as a Sonos
PLAYBAR) are grouped immediately at the device level.
• When compatible endpoints and sources are available in the same
room, only source devices show as available.
• A Sonos endpoint (PLAYBAR) may be added to a device group in the
Sonos app, but it is ignored by the Crestron Pyng media system.
o All compatible endpoint devices have their sources displayed as one. For
example, all Sonos speakers are displayed as one source named "Sonos."
o Source devices that are added as individual sources and later grouped are
displayed alone. For example, a Sonos CONNECT device added as an
individual source is displayed alone with the name set for it in the Sonos app.
o Media group names do not always match the device group names set in the
Sonos app.
• Device-Grouped Source Routes
o All compatible Sonos devices that may be grouped and that are required to
complete the routes to all rooms in the group are added to the appropriate
device group.
To Next Page
Loading...
