Product Manual – DOC. 8432A Crestron Pyng OS 2 for CP4-R • 207
Pair Devices Screen - Sonos (Speaker2)
To select Speaker1 as the left (master) speaker:
1. Open the Sonos app.
2. Select Speaker1, and then select Settings > Create Speaker Pair.
3. Create a pair between Speaker1 and Speaker2 by following the in-app
instructions.
4. Assign Speaker1 as the left speaker.
Speaker2 is hidden, and the resulting speaker pair is named Speaker1. The Crestron Pyng
system will be able to discover only Speaker1. If Speaker2 was assigned in the Crestron
Pyng system, it will report as offline, and a pop-up dialog is displayed stating that
Speaker2 was added as a satellite device to Speaker1.
To Next Page
Loading...
