Product Manual – DOC. 8432A Crestron Pyng OS 2 for CP4-R • 19
• Tap the location button to turn on the location feature for the device (if
supported), which is used to locate the device in the room.
NOTE: To identify paired TSR-310 handheld remotes using the locator
feature, ensure that the TSR-310 is awake and placed on its charging dock
before tapping the location button.
• Tap the trashcan button to delete the device from the gateway. The device
must be reacquired if it needs to be added back to the system.
3. Tap the plus button (+) to add the device to the room selected in step 1.
4. Enter a descriptive name for the device in the text field that is displayed.
5. Tap OK. The device is added to the room.
Pair Devices Screen - EX Gateway
After a wireless device is associated with a room, tap the gear button next to the
device name to display a Settings dialog box, which is used to configure device settings.
The settings dialog box for a keypad is shown on the following page.
To Next Page
Loading...
Need help?
General
