Crestron CP4-R User Manual

Product Manual – DOC. 8432A Crestron Pyng OS 2 for CP4-R • 51
Source Routes Screen - Bedroom Configuration (Available Sources)
• Use the Default Source menu to select the default source that is shown for the
room in the user control interface.
o Select Use Last Source to make the last-used source the default.
o Select None to have no source display by default. A blank screen is displayed
instead.
• Use the Allowed Sources menu to select the media sources that may be
controlled from the room.
o Tap the checkbox next to a source name to enable or disable the source from
appearing as a selectable item in the user control interface for the room.
o A filled check box indicates that the source may be selected for the room.
NOTE: Tap and hold a media source in the Allowed Sources menu until it turns
green to move it up or down in the menu. The order of the Allowed Sources menu
matches the order that the media sources appear in the user control interface.
Tap the Preferred Routing tab to set a preferred audio endpoint in the room for a media
source.

Crestron CP4-R Specifications

General

Brand	Crestron
Model	CP4-R
Category	Controller
Language	English