Product Manual – DOC. 8432A Crestron Pyng OS 2 for CP4-R • 77
Tap the Actions tab to program the keypad buttons to recall scenes and other actions.
Actions & Events Screen - Actions Tab
The following configuration options are provided:
• Use the left screen panel to select the keypad button that will be associated with
an action. Tap the desired button to select it.
• Use the center panel to select the type of action that will be associated with the
keypad button and to configure action-related behavior.
NOTE: Other configuration options may be provided depending on the selected
mode.
o Use the Mode drop-down menu to select the type of action that is recalled by
pressing the keypad button (such as "Scene").
o If a compatible mode is selected, use the Button Behavior drop-down menu
to set the keypad button behavior for recalling the selected action.
o If Scene is selected for Mode, use the Feedback Behavior drop-down menu to
set the feedback behavior for recalling the scene.
o If Scene is selected for Mode, tap the check box next to Enable Dimming for
Lights to allow lighting loads to be dimmed via a press-and-hold keypad
action.
o If Scene is selected for Mode, tap the check box next to Enable Time of Day
Actions to enable setting actions based on the time of day.
o Tap Set all buttons to default functionality to restore the keypad buttons to
their default functionality.
To Next Page
Loading...
