Settings
LD500 V2.03 Seite 29 von 67
11.3.4.2.2 Date & Time
Home ➔Settings ➔ Device settings ➔ Date & Time
11.3.4.2.3 SD-Card
Home ➔Settings ➔ Device settings ➔ SD-Card ➔ Reset Logger Database
Home ➔Settings ➔ Device settings ➔ SD-Card ➔ Erase SdCard
Home ➔Settings ➔ Device settings ➔ SD-Card ➔ Test SdCard
By pushing the Time Zone description field and
enter the correct UTC, you can set the correct
time all over the world.
The summer and wintertime switchover is
realized by pushing the Daylight Saving button.
By pressing Reset Logger Database all actual
stored data on SD-Card will be blocked for use in
LD500 / LD510. Nevertheless all data are still
stored and available for external use only.
By pressing Erase SdCard all Data on the SD-Card
will be deleted.
With activation of Test SdCard data are written and
read to and from the SD-card.
The number of test cycles, as well as possible errors
and error codes are display in the status line.
Press the Back button to returns to the device
settings menu.
To Next Page
Loading...
Need help?
General