Flow sensor VA5xx
LD500 V2.03 Seite 52 von 67
13.6.1.7 Settings Pulse / Alarm output of VA 5xx
External senor ➔ Settings ➔ Sensor settings ➔ C1➔ arrow right (2.page) → More-Settings ➔ Pulse / Alarm
External senor ➔ Settings ➔ Sensor settings ➔ C1➔ arrow right (2.page) → More-Settings ➔ Pulse
The pulse output of the VA 5xx could be set
functionally as pulse output or alarm output.
Function to activate by pressing either the
“Pulse” or “Alarm” button.
In case of no use, please select “none”.
Inputs / changes to be confirmed with “OK”
button. Return to main menu with “Back”.
To set up the pulse first the unit and the
measurement value have to be defined.
Unit selection by pressing “unit” button and
choice one of the possible units “kg”, “cf”, “ltr”
or “m³”).
Pulse weight setting by entering the text field
“Value”.
Here with defined 1 pulse per m³ and with
positive polarity.
With „Polarity“ the switching state could be
defined.
Pos. = 0→ 1 neg. 1→ 0
Inputs / changes to be confirmed with “OK”
button. Return to main menu with “Back”.
To Next Page
Loading...
Need help?
General