CS Instruments LD 500 User Manual

Settings
LD500 V2.03 Seite 30 von 67
11.3.4.2.4 System update
If required, there is the possibility for the LD 500 to download a firmware update to the
device via the USB stick. The latest software is available on the CS Instruments GmbH
homepage
The received file must then be stored on the USB stick and transferred to your device as
described below.
Home ➔Settings ➔ Device settings ➔ System-Update
P1: V033
C1
I1
Update Kanäle
11.3.4.2.5 Check for Updates
Home ➔Settings ➔ Device settings ➔ System-Update➔ check USB-Stick for new Updates
P1: V033
C1
I1
Update Kanäle
If it is required to install an older software version, you have press the button „Force all“
Overview of System-Update-Functions.
f after pressing the button “Check USB Stick
for new Software updates” the following
messages appear in the window, is the LD
500 is not properly connected to the USB
flash drive or there are no files available.
I If the LD 500 is correctly connected to the
USB stick and there are new versions of the
individual SW Parts, the new versions are
marked in red.
The update is started by pressing the
„Update selections“ button.

CS Instruments LD 500 Specifications

General

Brand	CS Instruments
Model	LD 500
Category	Security Sensors
Language	English