Safety instruction
LD500 V2.03 Seite 6 von 67
3 Service and maintenance
Service and maintenance work must only be carried out by authorized personnel.
4 Environmental protection
• Disposal of defective batteries / dead batteries according to the valid legal
regulations.
• After the end of the useful life, take the product to the separate collection
for electrical and electronic equipment (observe local regulations) or return
the product to CS Instruments GmbH & Co.KG for disposal.
CS Instruments GmbH & Co.KG makes no warranty as to its suitability for any particular
purpose and assumes no liability for any errors contained in this manual. Nor for
consequential damages in connection with the delivery, performance or use of this device.
5 Intended use
The LD 500 is a leak detector for quick and reliable leak detection in/on compressed air
systems.
The LD500 leak detector evaluates the ultrasonic waves generated by the leakage based on
distance and pressure.
It is solely designed and constructed for the intended use described here and may only be
used for this purpose.
The user must verify that the device is suitable for the intended use. The technical data listed
in this datasheet are binding.
Improper handling or operation outside the technical specifications is not permitted. Claims
of any kind for damages arising from improper use are excluded.
To Next Page
Loading...
Need help?
General