Cupra BORN 2024 - Window Controls; Opening and Closing the Windows

106
Opening and closing
Unlocking the rear lid from inside the lug-
gage compartment
●
Insert the key blade into the slot and move
the key in the direction of the arrow until the
lock unlocks ›››Fig.79.
Window controls
Opening and closing the windows
Fig.80 Detail of the driver's door: window
controls.
1
Electric window operation buttons.
2
Button for activating the rear power
window operation and comfort opening
and closing.
3
Button to deactivate the power window
operation buttons on the rear doors.
By default, the power windows on the front
doors can be operated with the buttons
›››Fig.80
1
.
Open the window: press the button.
Close the window: pull the button.
Briey press button ›››Fig.80
2
to acti-
vate the operation of the rear door power
windows. When the operation of the rear
door power windows is activated, the but-
ton's light is on.
Briey press the button to activate
the operation of the front door power win-
dows.
If, after activating the operation of the rear
door power windows, more than 10 sec-
onds elapse without them being activated,
the front door power window operation is
reactivated.
Press the button ›››Fig.80
3
to deac-
tivate the power window buttons located
on the rear doors. When these buttons
are deactivated the button light turns out.
After switching o the ignition, the windows
can still be opened and closed for a short pe-
riod of time using the buttons on the doors,
provided that neither the driver's door nor the
passenger door is opened.
Comfort opening and closing
Press and hold the button to activate the
comfort opening and closing of power win-
dows on all doors. When the function is activa-
ted, the light on the button ashes. All windows
can now be opened or closed simultaneously
with one of the two buttons .
If more than 10 seconds elapse without the
power windows being operated, after the com-
fort opening and closing has been activated,
the operation of the front door windows is re-
activated.
Briey press and hold the button to deac-
tivate the function.
When the ignition is o, the windows can be
opened and closed from the outside with the
vehicle key:
●
Press and hold the unlock button or lock
button on the key.
●
Hold a nger on the locking sensor surface
of the door handle for a few seconds until the
windows are closed ›››page94. The vehicle
key must be in the proximity zone for this pur-
pose.
●
To interrupt the function, release the unlock
or lock button, OR remove your nger from the
sensor surface.
A valid vehicle key must be present in the vicin-
ity for this purpose. Once all the windows are
closed, all of the turn signals ash once as a
conrmation.