Cupra BORN 2024 - Troubleshooting

70
Safety
The emergency call is activated and a voice
connection is established with the emer-
gency coordination centre.
If you press the emergency call button inadver-
tently, hang up the call immediately:
1. Press the emergency call button again until
the control light stays green.
Note
Only press the emergency call button
›››Fig.47 in the event of an emergency.
Automatic activation of an emergency call
The automatic emergency call is only activated
if the ignition is switched on.
A connection to the public rescue coordina-
tion centre is automatically established in the
following situations:
●
Immediately after the airbags are triggered.
●
Immediately after activation of the seatbelt
pretensioner.
●
Depending on equipment, in the event of
intervention of the Emergency Assist system.
The automatic emergency call cannot be in-
terrupted by pressing the emergency call but-
ton ›››Fig.47.
If the public rescue control centre's questions
remain unanswered, the rescue measures be-
gin automatically.
Troubleshooting
Fault in the emergency call service.
The control lamp of the emergency call button
lights up in red and stays on. In addition, the
following message may appear on the instru-
ment cluster display:
Error: Emergency call function. Work-
shop!
There is a fault in the emergency call service.
In this case, you will not be able to make any
emergency calls.
1. Immediately visit a qualied specialist
workshop and have the fault repaired. CU-
PRA recommends a CUPRA dealership.
Limited emergency call service
The control lamp of the emergency call button
lights up in red and stays on. In addition, the
following message may appear on the instru-
ment cluster display:
Emergency call function limited. Work-
shop!
The Emergency Call Service is only available
with limitations. E.g. no voice connection to
the CUPRA emergency call centre can be es-
tablished.
1.
Immediately visit a qualied specialist
workshop and have the fault repaired. CU-
PRA recommends a CUPRA dealership.