Heating, ventilation and cooling
Seat heating
Fig.104 Schematic representation: Seats
menu
The front seats have three levels of electric
heating.
Turning on the seat heating
There are several ways to switch on the front
seat heating:
●
Tap on the symbol located in: main menu
Seats > Air conditioning.
●
Tap on the Climabar symbol ›››Fig.102.
●
Tap with two ngers at once on touch
zones
1
(for driver) and
2
(for passenger)
›››Fig.102.
Controlling seat heating
●
Press the corresponding seat function but-
ton to switch on the seat heating to maximum
power.
●
Press the function button of the correspond-
ing seat repeatedly until the desired level is set.
●
To switch o seat heating, press the corre-
sponding seat icon several times until no LED is
on.
If the passenger leaves his or her seat while
the seat heater and drive system are switched
on, the heating of that seat switches o auto-
matically. The indication on the infotainment
system turns grey after approx 2 seconds. If
the passenger sits down again while the drive
system is still switched on, the seat heating
switches on again automatically.
If the heating of this seat switches o automat-
ically, you can switch it on again manually if
necessary, even if the seat is unoccupied.
Smart heated seat
Availability depending on the equipment. This
is an smart function that automatically acti-
vates and regulates the driver and front pas-
senger seat heating for greater comfort.
The seat heating for the driver's seat and front
passenger seat can be adjusted separately to
achieve fully adapted comfort. In addition, in
To Next Page
Loading...
