Cupra BORN 2024 - Charging Modes

84
High-voltage battery
1)
Subject to the conditions of the charging point operator.
13
End the charge or restart it. Visible during
an active charging process.
Instructions for plugging in the charging
connector
Information on the current charging process is
displayed in the infotainment system.
Close the screen:
●
Press the function button.
●
EITHER: the display ends automatically after
2 minutes.
●
OR: lock the vehicle.
Charging modes
Immediate charging (default charging set-
ting)
1.
Set the maximum battery charging level for
the desired range in the Infotainment sys-
tem.
2.
Plug in the charging cable
3. Charging starts automatically.
1)
Programmed charging
The scheduled charge is associated with a GPS
location. To create a scheduled charge, you
must be at the location where you wish to
create the charging schedule, e.g. at home, in
your oice, etc.
To schedule charging, follow the steps below:
1. Access the Schedule charging menu
1
.
2. Add a new charging schedule based on
your current location.
3. Congure the schedule.
4. Return to the charging menu to activate
the desired schedule.
5. Select the schedule from the drop-down
button.
Note
●
If none of the schedules are activated, the
vehicle will default to an immediate charge.
●
When you leave and return to the sched-
uled location, the vehicle will run the most
recently activated schedule.
●
Scheduling is not compatible with DC
charging points.
Delete a schedule:
1.
Open the main Charging menu.
2.
Tap the Schedule tab.
3.
Tap the Edit button.
4.
Delete the desired scheduling .
Scheduled charging settings
Departure time
Allows you to congure the time and days you
want to have your vehicle charged for a certain
location.
The vehicle will charge to the maximum level
you have set.
You can use up to 3 dierent departure times
and activate or deactivate them at any time by
re-entering the schedule.
Preferred times
Allows you to congure up to four time slots in
which the vehicle will prioritise charging. This is
ideal if you are on a variable cost energy tari,
because you can charge when the cost of en-
ergy is low.
Edit the start and nish times of the time slots
by clicking on the time slot and activate the
preferred charging times by ticking the check-
box.
Charging levels
●
Minimum charging level: The minimum
charging level sets the minimum state of
charge for a saved schedule. This function can
be used to guarantee a minimum range.