Cupra BORN 2024 - Operating Conditions; Connection and Disconnection

Driver information
27
Road signs detection system
WARNING
The technology in the road sign detection
system cannot change the limits imposed by
the laws of physics and only works within the
system's limits. The increased convenience
provided by the dynamic road sign display
system should not lead you to take any risks.
The system is not a replacement for driver
awareness.
●
Adapt your speed and driving style to
suit visibility, weather, road and traic condi-
tions.
●
Poor visibility, darkness, snow, rain and fog
may result in the system not displaying road
signs, or not displaying them correctly.
●
If the camera’s eld of view is dirty, covered
or damaged, the operation of the system may
be aected.
WARNING
The driving recommendations and traic in-
dications shown on the road sign detection
system may dier from the actual current
traic situation.
●
The system cannot recognise or display all
road signs correctly.
●
Road signs and traic regulations have pri-
ority over the recommendations and displays
provided by the system.
Limited operation
The road sign detection system has certain
limitations. The following cases may cause the
system to function in a limited way or not at all:
●
Poor visibility, e.g. in snow, rain, fog or in-
tense mist.
●
Dazzling, e.g. caused by head-on traic or by
the sun.
●
Driving at high speed.
●
If the camera is covered or dirty.
●
If the road signs are partially or totally ob-
structed, e.g. by trees, snow, dirt or other vehi-
cles.
●
Non-compliant road signs.
●
Damaged or bent road signs.
●
Variable message signs on signalling gantries
(variable indication of road signs by LEDs or
other lighting units).
●
If outdated maps are used in the navigation
system.
●
Adhesives aixed to vehicles that depict road
signs, e.g. speed limits on lorries.
Driving with the speed warning
function
Operating conditions
The speed warning function gives warnings at
speeds above 20 km/h.
Connection and disconnection
Depending on the country, the speed warning
function is always activated when the vehicle's
drive system is switched on. In this case, the in-
fotainment system displays an overview of the
individual systems and automatically activated
functions in the input menu.
If desired, you can deactivate the speed warn-
ing manually in the infotainment system:
1. Open the Assistance systems menu.
2. Switch the speed warning on or o in the
corresponding submenu.
Activating and deactivating the audible
warning
In the infotainment system:
1. Open the Assistance systems menu.
2. Open the Speed Warning.
3. Activate or deactivate the audible warn-
ing under the corresponding option
›››page33.
Note
The audible warning is activated whenever
the vehicle's drive system is activated.
Adjusting the warning thresholds
You can manually adjust the warning thresh-
olds of the speed warning function.