Cupra BORN 2024 - Page 174

172
Assistant systems
●
Always use up to date navigation data.
●
Always take into account the speed limit. In
the case of speed limits that are not included
in the navigation data, the speed limit may be
exceeded.
Note
Please also note the information of relevance
to safety on the speed limiter ›››page170.
Limitations of proactive speed ad-
justment
In addition to the limitations of the dynamic
road sign display system, the speed limiter with
proactive speed adjustment has the following
limitations inherent to the system:
●
The speed limiter with proactive speed ad-
justment only recognises road signs showing a
speed limit.
●
Road signs that indirectly show a speed re-
striction, e.g. signs at the entrance to towns,
are only recognised on the basis of navigation
data.
●
If a warning is given of a speed restriction
based on navigation data, without it being de-
tected by the dynamic road sign display, the
indicated speed will be adjusted to the most
recently saved speed.
●
The speed limiter with proactive speed ad-
justment is not available for speed restrictions
lower than approx. 30 km/h (approx. 20 mph)
that are detected. In this case, a relevant mes-
sage is displayed on the instrument cluster dis-
play.
Activate proactive speed adjust-
ment
The speed limiter with proactive speed adjust-
ment can be activated in the infotainment sys-
tem’s assistants menu.
Driving with proactive speed ad-
justment
●
Activate the proactive speed adjustment.
●
Switch on the speed limiter and start the
control ›››page170.
●
When the system recognises a new speed
limit, a warning is displayed on the instrument
cluster. This speed will be stored in the speed
limiter.
The system has recognised a new speed
limit and uses it for regulation.
Interrupting speed adjustment
●
Press the button on the multifunction
steering wheel or release and press the accel-
erator pedal twice. The last saved speed is re-
sumed.
●
Press the
button on the multifunction
steering wheel. The current speed is taken.
●
Press the button on the multifunction
steering wheel. The system switches to a pas-
sive state.
Adjust the displayed speed using the buttons
on the multifunction steering wheel
●
Tapping the buttons or will change the
speed by 1km/h (1mph).
●
Sliding your nger over or will change the
speed by 10km/h (5mph).
If you adjust the indicated speed excessively,
the proactive speed adjustment is interrupted.
Note
●
When a speed restriction is recognised, the
proactive speed adjustment also adapts the
saved speed, even if the speed limiter is not
active.
●
If the speed of travel considerably exceeds
the speed limit detected by the road signal
detection system, a relevant warning is dis-
played in the instrument cluster display.
●
When merging onto a motorway or dual
carriageway, the recommended speed is au-
tomatically saved as the desired speed.