CVC 400 - Page 56

CVC TECHNOLOGIES, INC. CVC 400 OPERATION MANUAL
9.2.3 Label Advance Roller Lock and Rewind Roller Lock
After installing the label roll, both label advance roller lock and rewind roller lock should be firmly
locked. An improper locking will lead to an abnormal label length (○
1
and ○
2
on Fig 9.3.3-1).
Fig.9.2.3-1
9.2.4 Label Web Tightness Adjustment
Always keep the label web slightly tensed is important, this ensures a smooth label dispensing and a
stable label length, also avoids wrinkles or unevenness (Fig 9.3-4).
Adjust the tightness using web clamp screw to correct a loose web condition.
Correct the loose web
on the peel blade.
Label peel blade
Label web should lay flat on the label peel blade
Label peel blade
o
×
Fig.9.2-4
9 - 3