CVC TECHNOLOGIES, INC. CVC 400 OPERATION MANUAL
Press to enter bottle diameter and then press key to confirm.
Press to enter label length for the labeling head A, and then press key to confirm.
Press to enter label length for the labeling head B, and then press key to confirm.
Finally to save the labeling data in memory: Press key → Job number and key.
Note:
*If the machine speed and other settings are applicable, save the job setup into any of the 50 available
memory positions numbered #1~#50.
* To change machine speed or other settings, press key or key, and then move to the
desired display to make change.
d. To recall memory from a previously saved job settings for reuse:
There are two ways to call a previous job setting:
1) Press , then press memory number, and then the key.
Finally press start conveyor key.
2) Press , then press memory number, and then the key.
Finally press start conveyor key.
e. To continue working with the same labeling job before the last power-off, after starting the machine,
press key, then key and then start conveyor key.
10 - 4
To Next Page
Loading...
