D-Link DNS-320L

322D-Link ShareCenter DNS-320L User Manual
Section 4 - Conguration
Local
Settings:
Remote
Settings:
Task (Name): the name used to refer to the backup job which
will be listed later in the Remote Backup list.
Folder Path: select a local network share folder or le as the
target or source for the backup job.
Remote IP: The backup process uses the Rsync protocol and
needs to know the IP address of the destination source or
target device for the backup. Input the IP of the remote NAS or
Linux le system.
Password: Enter the password that is used by the remote
backup server on the remote NAS or Linux le system.
Enable Encryption: Checking this box will enable SSH encryp-
tion of the les that are transferred (backed up) over the net-
work between the local and remote devices.
Ignore existing le(s): Checking this box prevents the backup
process from writing over any les in the target le system that
are not part of the backup les or folders. Therefore any exist-
ing les in the target system are preserved.
Incremental backup support Num (#): Checking this box
provides multiple backup-capability at scheduled times. The
rst backup in an incremental series captures all the les for
backup. Subsequent backups are incremental in that only the
les and the folders that have changed in the backup source
since the last incremental backup will need to be backed up.
Each incremental backup builds a complete snapshot of the
backup source however only the initial backup contains all the
original les and folders. The subsequent backups in the incre-
mental series contain new les and folders plus the links to the
rst incremental backup.