D-Link DNS-320L User Manual

340D-Link ShareCenter DNS-320L User Manual
Section 4 - Conguration
Connect a MTP USB device to the USB port on the back panel of the
device. The DNS-320L will enter backup mode if MTP Backups has been
enabled in the MTP backup settings.
Press the USB button to start the backup process. The white USB LED
ashes briey to indicate that the backup is in process. The ShareCenter
will create a new folder in the destination folder that you selected in the
MTP backups settings and will copy all the media les from the MTP USB
device to this folder. At this time the USB LED remains white until the
device is disconnected.
MTP Backup Process

D-Link DNS-320L Specifications

Power

power supply	External DC 12 V / 3 A
power saving mode	Auto power recovery
scheduled power off	Supported

Operating Environment

operating temperature	32 to 104 ˚F (0 to 40 ˚C)
storage temperature	-4 to 158 ˚F (-20 to 70 ˚C)
humidity	5% to 90% non-condensing

Ports & Interfaces

ethernet port	1 x 10/100/1000 Gigabit
usb port	1 x USB 2.0
connection to UPS	Supported through USB port

Weight and Dimensions

weight	0.25 lbs
dimensions	3.54” x 5.68” x 7.6”
dimensions (mm)	90 x 144.3 x 193.3 mm