D-Link DNS-320L User Manual

93D-Link ShareCenter DNS-320L User Manual
Section 4 - Conguration
Creating Multiple Users
Start the Create Users wizard as described for creating a single user above.
Select Create Multiple Users and then click Next to continue.
Enter the following information:
Enter a Username Prex for the account group. This prex will be used
to identify all user accounts in this group. Usernames will be in the format
Username Prex+Account Prex.
Enter an Account Prex. The Account Prex is a starting number (Eg. 1, no
alphabet letters are allowed) used to identify users in this group.
Enter the Number of Users you want to create. The remaining amount of us-
ers which can be added is displayed below the input eld.
Enter a password in the Password eld and conrm the password in the
Conrm Password eld
Check the Overwrite Duplicate Accounts box to have existing accounts
with the same credentials overwritten by the new accounts.
Click Next to continue.

D-Link DNS-320L Specifications

Power

power supply	External DC 12 V / 3 A
power saving mode	Auto power recovery
scheduled power off	Supported

Operating Environment

operating temperature	32 to 104 ˚F (0 to 40 ˚C)
storage temperature	-4 to 158 ˚F (-20 to 70 ˚C)
humidity	5% to 90% non-condensing

Ports & Interfaces

ethernet port	1 x 10/100/1000 Gigabit
usb port	1 x USB 2.0
connection to UPS	Supported through USB port

Weight and Dimensions

weight	0.25 lbs
dimensions	3.54” x 5.68” x 7.6”
dimensions (mm)	90 x 144.3 x 193.3 mm