Advanced Configuration Settings
64
DWC-1000 Wireless Controller User’s Guide
3. Edit the settings as desired (see 64).
4. Click Save Settings.
Table 4-2. Fields on the MULTI VLAN SUBNET CONFIG Page
Field Description
MULTI VLAN SUBNET
VLAN ID Read-only field that shows the ID you assigned to the VLAN when you created it.
IP Address Enter the IP address for the VLAN.
Subnet Mask Enter the subnet mask for the VLAN.
DHCP
DHCP Mode Select a DHCP mode for the VLAN. Choices are:
• None = select this setting if the computers on the LAN are configured with static IP addresses
or are configured to use another DHCP server. The remaining fields become unavailable.
• DHCP Server = select this setting to use the wireless controller as a DHCP server. Complete
the remaining settings on the page.
• DHCP Relay = if you select this setting, you need only enter the relay gateway information.
Domain Name Enter the domain name for the VLAN.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
