D-Link DXS-1210 Series User Manual

4 Configuration D-Link DXS-1210 Series User Manual
9
9
5
5
Figure 4.161 – Security > SSL > SSL Service Policy
Policy Name: Enter a policy name for SSL.
Click the Add button to save your settings.
Click the Find button to locate a specific entry based on the information entered.
Session Cache Timeout (60-86400): Enter the session cache timeout value. The value is between 60 and
86400 seconds.
Cipher Suites: Select the cipher suites that will be associated with this profile.
Click the Apply button to save your settings.
OAM > Cable Diagnostics
The Cable Diagnostics page is designed primarily for administrators and customer service representatives to
examine the copper cable quality. It determines the type of cable errors in the cable.
Select the range of ports and then click the Test button to start the diagnosis.
Figure 4.162 – OAM > Cable Diagnostic
Click the Clear button to clear all the information for the specific port.
Click the Clear All button to clear all the information in this table.

D-Link DXS-1210 Series Specifications

General

Product Series	DXS-1210
Power Supply	Internal
Jumbo Frame Support	9KB
Number of Ports	12
Layer	L2+
Form Factor	Rack-mountable
Uplink Ports	10G SFP+
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C