4 Configuration D-Link DXS-1210 Series User Manual
16
Ping
To ping a computer or device, enter either Target IPv4 or IPv6 Address, Ping Times and Timeout. Enter
the required information, Tick the Infinite option, to disable the Ping Times feature and click Apply. The
results will be displayed in the Result box.
Figure 4.20 – Ping
Reset
Select which reset option you want to perform and click Apply.
Figure 4.21 – Tool Menu > Reset
Reboot System
Select to save your current settings and then click Reboot to restart the Switch.
Figure 4.22 – Tool Menu > Reboot System
Destination: Select the configuration destination to be saved.
Startup-config: When checking the box, only the current startup configuration file will be backed up which
may be stored in the “Config 1” or “Config 2” location.
Tool Bar > Smart Wizard
By clicking the Smart Wizard button, you can re-run to the Smart Wizard if you wish to make any changes.
Tool Bar > Online Help
The Online Help provides two ways of online support: D-link Support Site will lead you to the D-Link
website where you can find online resources such as updated firmware; User Guide can offer an immediate
reference for the feature definition or configuration guide.
Figure 4.23 – Online Help
To Next Page
Loading...
Need help?
General
