D-Link DXS-1210 Series User Manual

5 Command Line Interface D-Link DXS-1210 Series User Manual
108
debug info
Purpose To display the ARP table and MAC FDB information of the
Switch.
Syntax
debug info
Description
The debut info command displays the ARP table and MAC FDB
of the Switch.
Parameters None.
Restrictions Only Administrator can issue this command.
Example usage:
To display the ARP table and MAC FDB information of the Switch:
DXS-1210-12TC> debug info
ARP table :
Address Hardware Address Type Interface Mapping
------------------- ---------------------------- -------- --------------- ----------------
10.90.90.97 00-11-6B-66-15-E7 ARPA vlan1 Dynamic
MAC table :
Index VLAN MAC Address Type Ports
------- ------------ --------------------- -------- -------------
1 1 00-11-6B-66-15-E7 Dynamic 1
Total MAC Addresses displayed: 1
DXS-1210-12TC>
debug show tech-support
Purpose
To display the Switch’s information needed by the engineers to
troubleshoot or analyze a problem.
Syntax
debug show tech-support
Description
The debug show tech-support command displays technical
support information of the Switch.
Parameters None.
Restrictions Only Administrator and Operator-Level can issue this command.
Example usage:
To display technical support information of the Switch:
DXS-1210-12TC> debug show tech
debug show tech-support
DXS-1210-12TC> debug show tech-support

D-Link DXS-1210 Series Specifications

General

Product Series	DXS-1210
Power Supply	Internal
Jumbo Frame Support	9KB
Number of Ports	12
Layer	L2+
Form Factor	Rack-mountable
Uplink Ports	10G SFP+
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C