D-Link Router - Page 102

97D-Link DWR-961 User Manual
Section 3 - Conguration
QoS classes are sublters that feed into the larger QoS Queues.
QoS Classication - Add
Name: Enter the name of the queue. This is for user reference only, and
does not aect functionality.
Class Enable: Check this box to enable the queue.
Ingress
Interface:
Specify the inbound interface to which classication will apply.
Ether Type: Select an Ether Type from the dropdown menu. Depending on
the type selected, the other options on this page may change.
Packet
Length Rule:
Specify whether the class will be triggered by a packet length
of Greater than, Less than, or Equal to the length specied in
Packet Length.
Packet
Length:
Enter a packet length in bytes between 46 and 1500 that will
trigger the above classication.
Source MAC
Address:
Enter a source MAC address to which the class will apply.
(Optional)
Source MAC
Mask:
Specify the MAC Mask used to lter MAC addresses. (Optional)
Destination
MAC Address:
Enter a destination MAC address to which the rule will apply.
(Optional)class
Destination
MAC Mask:
Specify the MAC Mask used to lter MAC addresses. (Optional)