EasyManuals Logo

D-Link xStack DES-3528 Series Cli Reference Guide

D-Link xStack DES-3528 Series
605 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
134
DES-3528:admin# show port dot1v ports 1-2
Command: show port dot1v ports 1-2
Port : 1
Protocol Group ID VLAN Name Protocol Priority
----------------- ---------------- -----------------
1 default -
2 vlan_2 -
3 vlan_3 -
4 vlan_4 -
Port : 2
Protocol Group ID VLAN Name Protocol Priority
----------------- ------------ -----------------
1 vlan_2 -
2 vlan_3 -
3 vlan_4 -
4 vlan_5 -
Total Entries: 2
DES-3528:admin#
enable pvid auto_assign
Purpose
Used to enable auto assignment of PVID.
Syntax enable pvid auto_assign
Description
This command enables the auto-assign of PVID. When this is enabled, PVID will be possibly
changed by PVID or VLAN configuration. When user configures a port to VLAN Xs untagged
membership, this ports PVID will be updated with VLAN X. In the form of VLAN list
command, PVID is updated with last item of VLAN list. When user removes a port from the
untagged membership of the PVID’s VLAN, the port’s PVID will be assigned with “default
VLAN”. The default setting is enabled.
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User-level users can issue this command.
Example usage:
To enable the auto-assign PVID:
DES-3528:admin# enable pvid auto_assign
Command: enable pvid auto_assign
Success.
DES-3528:admin#
disable pvid auto_assign
Purpose
Used to disable auto assignment of PVID.
Syntax disable pvid auto_assign
Description
This command disables the auto-assign of PVID. When it is disabled, PVID only be changed
by PVID configuration (user changes explicitly). The VLAN configuration will not
automatically change PVID. The default setting is enabled.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To disable the auto-assign PVID:

Table of Contents

Other manuals for D-Link xStack DES-3528 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link xStack DES-3528 Series and is the answer not in the manual?

D-Link xStack DES-3528 Series Specifications

General IconGeneral
BrandD-Link
ModelxStack DES-3528 Series
CategorySwitch
LanguageEnglish

Related product manuals