xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
16
delete account
Purpose
Used to delete an existing user account.
Syntax delete account <username>
Description
This command is used to delete an existing entry.
Parameters
<username> − Name of the user who will be deleted.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To delete the user account “System”:
enable password encryption
Purpose
Used to enable password encryption.
Syntax enable password encryption
Description
The user account configuration information will be stored in the configuration file, and can be
applied to the system later.
If the password encryption is enabled, the password will be in encrypted form.
When password encryption is diabled, if the user specifies the password in plain text form,
the password will be in plain text form. However, if the user specifies the password in
encrypted form, or if the password has been converted to encrypted form by the last enable
password encryption command, the password will still be in the encrypted form. It cannot be
reverted to the plaintext.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable password encryption:
To Next Page
Loading...
Need help?
General